Workwear in Aberdeen: Offshore, Energy & Trade Kit

Workwear in Aberdeen.

Aberdeen doesn't dress like anywhere else in Britain — because it works offshore. The kit the Energy City needs is built around flame, static and the North Sea, and it's a different spec from a mainland trade. Here's what the city's industries wear, and the standards behind it.

Multi-norm

Offshore coveralls

FR + antistatic

Energy spec

Express

To AB postcodes

An energy economy, and a harbour

Aberdeen is the UK's offshore capital. The city and its heliport at Dyce run the North Sea's oil & gas, subsea engineering and, increasingly, decommissioning and offshore wind — the Energy Transition Zone is pulling the same trades into renewables. Around it sits one of Scotland's busiest fishing and seafood-processing harbours, and the wide agriculture of Aberdeenshire beyond the ring road.

That mix is why Aberdeen workwear is unusual. An offshore or energy job carries flame, hydrocarbon-static and low-light hazards at the same time, so the region specifies multi-norm garments that a general mainland trade never would.

· Offshore oil & gas· Subsea engineering· Decommissioning· Offshore wind & renewables· Fishing & seafood processing· Aberdeenshire agriculture

Built for flame, static and the North Sea

Match the garment to the hazard — and offshore stacks several hazards into one coverall.

Offshore / energy

Multi-norm coveralls

FR, antistatic and hi-vis in a single garment — the offshore default, because you can't wear three coveralls at once.

EN ISO 11612EN 1149-5EN ISO 20471

Subsea / fabrication

Hot-work & chemical

Welding and cutting in the yard add welding protection; wash-down and fluids add chemical splash.

EN ISO 11611EN 13034

Deck / yard in winter

Cold & wind protection

North Sea exposure means insulated, windproof layers rated for cold — over the FR base, not instead of it.

EN 342EN 14058

Most operators publish a PPE matrix that sets the exact combination for their installation. Send us yours and we'll build the kit to it. Browse multi-norm offshore coveralls →

What the labels have to say

Standard	Protects against	Why Aberdeen needs it
EN ISO 11612	Heat & flame	Base FR requirement on almost every energy site
EN 1149-5	Static discharge	Hydrocarbon / explosive atmospheres — the defining offshore add-on
EN ISO 11611	Welding & hot work	Fabrication yards and topside repairs
EN 13034	Chemical splash (Type 6)	Fluids, muds and wash-down
EN ISO 20471	High visibility	Deck, yard and heli-deck low light
EN 342	Cold & wind	North Sea winter exposure

Kit we've put on the ground here

Real supply · client kept confidential

A subsea engineering & fabrication yard

Mobilising a crew for a North Sea decommissioning project, the yard needed multi-norm coveralls plus hi-vis fast, all to the operator's offshore PPE matrix.

What they needed

Multi-norm FR / antistatic coveralls plus hi-vis for the decommissioning crew

What we supplied

Coveralls to EN ISO 11612 / EN 1149-5 with EN ISO 20471 panels, embroidered, plus EN 342 mid-layers

Outcome

Full crew kitted to the operator's matrix ahead of mobilisation, with repeat orders each project phase

Turned around inside the yard's mobilisation window. We keep client names confidential — the detail here is real, the identity isn't shown.

Estates & training providers

Industrial estates & parks

Altens Industrial Estate
Tullos
Dyce — airport & heliport
Bridge of Don
Energy Transition Zone (ETZ)

Colleges & training providers

North East Scotland College (NESCol)
Robert Gordon University
University of Aberdeen
OPITO-approved training centres

Kitting out apprentices or a training cohort? We supply colleges and OPITO centres with embroidered student kit. Open a trade account →

Aberdeen workwear FAQ

What workwear do offshore workers in Aberdeen need?

Most Aberdeen offshore operators specify a multi-norm coverall combining flame resistance (EN ISO 11612), antistatic protection (EN 1149-5) and high-visibility (EN ISO 20471) in one garment, because a North Sea installation carries hydrocarbon, spark and low-light risks together. Hot work adds EN ISO 11611, chemical handling adds EN 13034, and deck work in winter adds EN 342 cold and wind protection. Always check the operator's own PPE matrix — it sets the exact combination.

Do you deliver workwear to Aberdeen and Aberdeenshire?

Yes. iNeedWorkwear is a nationwide supplier with next-working-day delivery to AB postcodes — Aberdeen, Dyce, Altens, Bridge of Don and the wider Aberdeenshire towns. We're not a shop in the city; we supply and ship, with trade accounts and logo embroidery available.

Why do Aberdeen energy jobs require antistatic clothing?

Because much of the energy estate is a potentially explosive atmosphere — hydrocarbons and flammable vapours are present. A static discharge from ordinary clothing can be an ignition source, so EN 1149-5 antistatic fabric is specified alongside flame resistance. It's one of the defining differences between Aberdeen energy workwear and general trade kit.